1 of 1

Metasploit

Tag: Exploitation

Metasploit, one of the most widely used penetration testing tools, is a very powerful all-in-one tool for performing different steps of a penetration test.

If you ever tried to exploit some vulnerable systems, chances are you have used Metasploit, or at least, are familiar with the name. It allows you to find information about system vulnerabilities, use existing exploits to penetrate the system, helps create your own exploits, and much more.

In this tutorial, we’ll be covering the basics of Metasploit Framework in detail and show you real examples of how to use this powerful tool to the fullest.

Table of Contents

Metasploit is available for Windows and Linux OS, and you can download the source files from the official repository of the tool in Github. If you are running any OS designed for penetration testing, e.g., Kali Linux, it will be pre-installed in your system. We’ll be covering how to use Metasploit Framework version 6 on Kali Linux. However, the basics will remain the same wherever you’re using Metasploit.

To install Metasploit in Linux you have to get the package metasploit-framework. On Debian and Ubuntu based Linux distros, you can use the apt utility:

On CentOS/Redhat you can the yum utility to do the same:

If you’re not sure if you have Metasploit or not, you can confirm by typing msfconsole in your terminal:

Metasploit Tip: Start commands with a space to avoid saving them to history

As you can see my machine already has Metasploit Framework installed.

Metasploit changes its greeting messages every time you fire up the Metasploit Framework with the msfconsole command, so you might see a different greeting message when you run it.

You can also find out which version is installed once the program loads. Type in version and hit enter to get the answer:

I am using version 6. If you haven’t updated your Metasploit anytime soon, it’s a good idea to update it before starting to use it. This is because if the tool is old then the updated exploits will not get added to the database of your Metasploit Framework. You can update the program by the msfupdate command:

msf6 > msfupdate

[*] exec: msfupdate

msfupdate is no longer supported when Metasploit is part of the operating

system. Please use ‘apt update; apt install metasploit-framework’

As you can see the msfupdate command is not supported. This happened because Metasploit is already a part of the operating system in the Kali Linux updated versions. If you’re using older versions of the Kali Linux, this command will work fine for your system.

Now that you know how to install and update the Metasploit framework, let’s begin learning some of the basics related to Metasploit.

Basics of Penetration testing

Before we begin, let’s familiarize ourselves with some of the steps of a penetration test briefly. If you’re already familiar with the concept then you can just skip ahead to the good part. Let’s list some of the fundamental steps in penetration testing:

Information Gathering / Reconnaissance
Vulnerability Analysis
Exploitation

1. Information gathering / Reconnaissance

At the very beginning of any penetration testing, information gathering is done. The more information you can gather about the target, the better it will be for you to know the target system and use the information later in the process. Information may include crucial information like the open ports, running services, or general information such as the domain name registration information. Various techniques and tools are used for gathering information about the target such as – nmap, zenmap, whois, nslookup, dig, maltego, etc.

One of the most used tools for information gathering and scanning is the nmap or Network Mapper utility. For a comprehensive tutorial for information gathering and nmap which you can check out from .

2. Vulnerability Analysis

In this step, the potential vulnerabilities of the target are analyzed for further actions. Not all the vulnerabilities are of the same level. Some vulnerabilities may give you entire access to the system once exploited while some may only give you some normal information about the system. The vulnerabilities that might lead to some major results are the ones to go forward with from here. This is the step where Metasploit gives you a useful database to work with.

3. Exploitation

After the identified vulnerabilities have been analyzed, this is the step to take advantage of the vulnerabilities.

In this step, specific programs/exploits are used to attack the machine with the vulnerabilities.

You might wonder, where do these exploits come from?

Exploits come from many sources. One of the primary source is the vulnerability and exploit researchers. People do it because there is a lot at stake here i.e., there may be huge sums of money involved as a bounty.

Now, you may ask if the vulnerabilities are discovered, aren’t those application already fixed? The answer is yes, they are. But the fix comes around in the next update of the application.

Those who are already using the outdated version might not get the update and remains vulnerable to the exploits. The Metasploit Framework is the most suitable tool for this step. It gives you the option to choose from thousands of exploits and use them directly from the Metasploit console. New exploits are updated and incorporated in Metasploit regularly. You may also add some other exploits from online exploit databases like .

Further, not all the exploits are ready-made for you to use. Sometimes you might have to craft your own exploit to evade security systems and intrusion detection systems. Metasploit also has different options for you to explore on this regard.

4. Post Exploitation

This is the step after you’ve already completed exploiting the target system. You’ve got access to the system and this is where you will decide what to do with the system. You may have got access to a low privilege user. You will try to escalate your privilege in this step. You may also keep a backdoor the victim machine to allow yourself to enter the system later whenever you want. Metasploit has numerous functionalities to help you in this step as well.

5. Report

This is the step that many penetration testers will have to complete. After carrying out their testing, the company or the organization will require them to write a detailed report about the testing and improvement to be done.

Now, after the long wait, let’s get into the basics of the actual program – Metasploit Framework.

In this section, we’ll learn all the basics related to Metasploit Framework. This will help us understand the terminologies related to the program and use the basic commands to navigate through.

As discussed earlier, Metasploit can be used in most of the penetration testing steps. The core functionalities that Metasploit provides can be summarized by some of the modules:

Exploits
Payloads
Auxiliaries

Now we’ll discuss each of them and explain what they mean.

1. Exploits

Exploit is the program that is used to attack the vulnerabilities of the target. There is a large database for exploits on Metasploit Framework. You can search the database for the exploits and see the information about how they work, the time they were discovered, how effective they are, and so on.

2. Payloads

Payloads perform some tasks after the exploit runs. There are different types of payloads that you can use. For example, you could use the reverse shell payload, which basically generates a shell/terminal/cmd in the victim machine and connects back to the attacking machine.

Another example of a payload would be the bind shell. This type of shell creates a listening port on the victim machine, to which the attacker machine then connects. The advantage of a reverse shell over the bind shell is that the majority of the system firewalls generally do not block the outgoing connections as much as they block the incoming ones.

Metasploit Framework has a lot of options for payloads. Some of the most used ones are the reverse shell, bind shell, meterpreter, etc.

3. Auxiliaries

These are the programs that do not directly exploit a system. Rather they are built for providing custom functionalities in Metasploit. Some auxiliaries are sniffers, port scanners, etc. These may help you scan the victim machine for information gathering purposes. For example, if you see a victim machine is running ssh service, but you could not find out what version of ssh it is using – you could scan the port and get the version of ssh using auxiliary modules.

4. Encoders

Metasploit also provides you with the option to use encoders that will encrypt the codes in such a way that it becomes obscure for the threat detection programs to interpret. They will self decrypt and become original codes when executed. However, the encoders are limited and the anti-virus has many signatures of them already in their databases. So, simply using an encoder will not guarantee anti-virus evasion. You might get past some of the anti-viruses simply using encoders though. You will have to get creative and experiment changing the payload so it does not get detected.

Metasploit is open-source and it is written in Ruby. It is an extensible framework, and you can build custom features of your likings using Ruby. You can also add different plugins. At the core of the Metaslpoit framework, there are some key components:

msfconsole
msfdb
msfvenom

Let’s talk about each of these components.

1. msfconsole

This is the command line interface that is used by the Metasploit Framework. It enables you to navigate through all the Metasploit databases at ease and use the required modules. This is the command that you entered before to get the Metasploit console.

2. msfdb

Managing all the data can become a hurdle real quick, which is why Metasploit Framework gives you the option to use PostgreSQL database to store and access your data quickly and efficiently. For example, you may store and organize your scan results in the database to access them later. You can take a look at this tutorial to learn more about this tool –

3. msfvenom

This is the tool that mimics its name and helps you create your own payloads (venoms to inject in your victim machine). This is important since your payload might get detected as a threat and get deleted by threat detection software such as anti-viruses or anti-malware.

This happens because the threat detection systems already has stored fingerprints of many malicious payloads. There are some ways you can evade detection. We’ll discuss this in the later section dedicated to msfvenom.

4. meterpreter

meterpreter is an advanced payload that has a lot of functionalities built into it. It communicates using encrypted packets. Furthermore, meterpreter is quite difficult to trace and locate once in the system. It can capture screenshots, dump password hashes, and many more.

Metasploit Framework is located in /usr/share/metasploit-framework/ directory. You can find out all about its components and look at the exploit and payload codes. You can also add your own exploits here to access it from the Metasploit console.

Let’s browse through the Metasploit directory:

Type in ls to see the contents of the directory:

As you can see, there is a directory called modules, which should contain the exploits, payloads, auxiliaries, encoders, as discussed before. Let’s get into it:

All the modules discussed are present here. However, evasion, nops, and post are the additional entries. The evasion module is a new entry to the Metasploit Framework, which helps create payloads that evade anti-virus (AV) detection. Nop stands for no operation, which means the CPU will just move to the next operation. Nops help create randomness in the payload – as adding them does not change the functionality of the program.

Finally, the post module contains some programs that you might require post-exploitation. For example, you might want to discover if the host you exploited is a Virtual Machine or a Physical Computer. You can do this with the checkvm module found in the post category. Now you can browse all the exploits, payloads, or others and take a look at their codes. Let’s navigate to the exploits directory and select an exploit. Then we’ll take a look at the codes of that exploit.

What you’re seeing now are the categories of the exploits. For example, the linux directory contains all the exploits that are available for Linux systems.

Let’s take a look at the exploits for ssh.

As you can see, all the exploits are written in Ruby, and thus, the extension of the files is .rb. Now let’s look at the code of a specific exploit using the cat command, which outputs the content directly on the terminal:

You can see the code for the exploit is shown here. The green marked section is the description of the exploit and the yellow marked portion is the options that can be set for this exploit.

The description reveals what function this exploit will perform. As you can see, it exploits a known vulnerability of Cisco UCS Director. The vulnerability is the default password of the machine, which, if unchanged, may be used to gain access to the system. If you are someone who knows Ruby and has a good grasp of how the vulnerability works, you can modify the code and create your own version of the exploit. That’s the power of the Metasploit Framework.

In this way, you can also find out what payloads are there in your Metasploit Framework, add your own in the directory, and modify the existing ones.

Now let’s move on to the fun stuff. In this section, we’ll talk about some of the basic Metasploit commands that you’re going to need all the time.

Fire up the Metasploit console by typing in msfconsole. Now you will see msf6 > indicating you’re in the interactive mode.

I have the msf6 shown here, where 6 represents the version of the framework and console. You can execute regular terminal commands from here as well, which means you don’t have to exit out of Metasploit Framework to perform some other tasks, making it super convenient. Here’s an example – msf6 > ls

The ls command works as it is intended to. You can use the help command to get a list of commands and their functions. Metasploit has very convenient help descriptions. They are divided into categories and easy to follow.

Now, let’s take a look at some important commands.

Show command

If you want to see the modules you currently have in your Metasploit Framework, you can use the show command. Show command will show you specific modules or all the modules. Show command requires an argument to be passed with it. Type in “show -h” to find out what argument the command takes:

For example, you can see all the exploits by using the command in the following way:

This will list all the existing exploits, which will be a long list, needless to say. Let’s look at how many encoders are there:

Show command can be used inside of any modules to get specific modules that are compatible. You’ll understand this better in the later sections.

Let’s imagine you found a service running on an open port on the target machine. If you also know which version of the service that machine is using – you might want to look for already known vulnerabilities of that service.

How do you find out if that service has any vulnerability which has ready-made exploits on Metasploit?

You guessed it – you must use the search utility of Metasploit.

It doesn’t even have to be the exploits, you can also find out payloads, auxiliaries, etc., and you can search the descriptions as well.

Let’s imagine I wanted to find out if Metasploit has anything related to . Samba is an useful cross platform tool that uses the SMB (Server Message Block) protocol. It allows file and other resource sharing between Windows and Unix based-host. Let’s use the search command:

You can also notice the date and description of the exploit. There is also a metric called rank telling you how good the exploit is. The name is actually also the path of where the module is inside the /usr/share/metasploit-framework/

There is some useful information for the exploits written in the Rank, Check, and Disclosure columns. The rank of an exploit indicates how reliable the exploit is. The check functionality for an exploit lets you check whether the exploit will work or not before actually running it on a host. The disclosure date is the date a particular exploit became publicly available. This is a good indicator of how many systems will be affected by it.

A relatively new exploit will affect many of the machines running the service since they might not have updated the vulnerable application in the short time period.

The use command

After you’ve chosen the module you want to use, you can select the module by the use command followed by the name or the id of the module. Let’s use the first one we got from the search result:

You can also specify the number for the module:

Get the description of the module with the info command

If you’re not sure about a module you can always get the description and see what it does. As we showed you earlier, you could get the description by looking at the original code of the module. However, we’re going to show you a much faster and efficient way. For this, you have to use the command info after you’ve entered the use command to select an exploit:

As you can see, the info command shows a detailed description of the module. You can see the description of what it does and what options to use, including explanations for everything. You can also use the show info command to get the same result.

See the options you need to specify for the modules

For the modules, you will have to set some of the options. Some options will already be set. You will need to specify options like your target machine IP address, port, and things like this. The options will change according to what module you are using. You can see the options using the options or show options command. Let’s see this in action:

You can see the options for this specific exploit(unix/webapp/citrix_access_gateway_exec). You can also see the options for the default Payload (cmd/unix/reverse_netcat) for this exploit.

I have marked all the fields with different colors. The names are marked in green color. The current setting for each option is marked in pink. All of the fields are not required for the exploit to function. Some of them are optional. The mandatory ones will be listed as yes in the Required field marked in teal. Many of the options will be already filled out by default. You can either change them or keep them unchanged.

In this example, you can see the RHOSTS option does not have a current setting field value in it. This is where you will have to specify the target IP address. You will learn how to set it with the next command.

Use the set command to set a value to a variable

Set is one of the core commands of the Metasploit console. You can use this command to set context-specific values to a variable. For example, let’s try to set the target IP address for the above RHOSTS option field. Type in set RHOSTS [target IP]:

Now we’ve successfully set up the value of the RHOSTS variable with the set command. Let’s check if it worked or not. Type in show options:

The output shows the RHOSTS variable or option has the target machine IP address that we specified using the set command.

Choose the Payload

After we’ve specified the required options for our exploit, we have to set up the payload that we’ll be sending after the exploit successfully completes. There are a lot of payloads in all of Metasploit database. However, after selecting the exploit, you will get the only payloads that are compatible with the exploit. Here, you can use the show command usefully to see the available payloads:

Now you can choose any of the payloads that are listed. They are all compatible with the exploit. Let’s choose a different one rather than the default one. Here, we’ll use the set command to set the value of the payload variable to the name of the specific payload:

The output shows that the payload is set to (cmd/unix/reverse_ssh). Let’s set up the payload. Type in show options:

The option for the payload shows that the selected payload is now changed to our desired one (cmd/unix/reverse_ssh). You can set the payload options with the set command as well:

Here, we’ve set the local port for listening to 5000 from the default 4444. Let’s see our changes in the options.

Now that you’ve set up the exploit and the payload – you can start the fun. Let’s move on to the exploit commands.

Check if the exploit will work or not

Before going forward with the exploit, you might wonder if it is actually going to work or not. Let’s try to find out. We’ll have to use the “check” command to see the target host is vulnerable to the exploit we’ve set up –

As you can see, the target we’re attacking is not vulnerable to this exploit. So there’s no point in continuing this line of attacking. In reality, you’ll mostly know if the machine has the vulnerability to the exploit you’re running beforehand. This is just an example to illustrate what is possible.

We’ll show you an example of an exploitable machine in the next section. Keep on reading!

A penetration test walkthrough

In this section, I’ll demonstrate how penetration testing is done. I will be using the intentionally vulnerable Linux machine – Metasploitable 2. This machine is created to have its port open and running vulnerable applications. You can get Metasploitable on rapid7’s website.

Go to and fill up the form to download. After downloading Metasploitable, you can set it up in a VirtualBox or a VMware or any software virtualization apps. If you’re using VMware workstation player, you can just load it up by double clicking the Metasploitable configuration file from the downloaded files.

Before we begin, a word of caution – Always remember that infiltrating any system without permission would be illegal. It’s better to create your own systems and practice hacking into them rather than learning to do it in real systems that might be illegal.

Target identification and Host discovery

Now we’ll be performing the first step in any penetration testing – gathering information about the target host. I’ve created the Metasploitable system inside my local area network. So, I already know the IP address of the target machine. You might want to find out IP address of the target host in your case. You can use DNS enumeration for that case. DNS enumeration is the way to find out the DNS records for a host. You can use nslookup, dig, or host command to perform DNS enumeration and get the IP address associated with a domain. If you have access to the machine, you can just find out the IP address of the machine. For checking if the host is up, you can just use the ping command or use nmap for host discovery.

In my case, I ran ifconfig command on my Metasploitable machine, and got the IP address to be 192.168.74.129. Let’s see if our attack machine can ping the victim machine:

It’s clear that our attack machine can reach the victim machine. Let’s move on to the next step.

Port scanning & Service detection

This is the next step in the information gathering phase. Now we’ll find out what ports are open and which services are running in our victim machine. We’ll use nmap to run the service discovery:

As we can see, it’s party time for any penetration tester or hacker. There are too many ports open. The more open ports – the better the chance for one of the applications to be vulnerable. If you don’t know what we’re talking about, don’t worry. We’ve covered the scanning technique from the basics in a nmap tutorial that you can find .

Vulnerability Analysis

Now that we’ve performed the service detection step, we know what versions of applications our victim is running. We just have to find out which one of them might be vulnerable. You can find out vulnerabilities just by googling about them, or you can also search them in your Metasploit database. Let’s do the latter, and search in Metasploit. Fire up your Metasploit console with the msfconsole command.

Let’s find out if the first application in the list, vsftpd 2.3.4 (which is an ftp service running on port 21) that we found in our service detection phase, has any exploits associated with it. Search for vsftpd in your Metasploit console:

Whoa! The first one is already a hit. As you can see, the exploit rank is excellent and you can execute backdoor commands with this exploit. However, you must remember that this is metasploitable you’re attacking. In real systems, you will not find a lot of backdated applications with vulnerabilities. Let’s move on and check if the other applications are vulnerable or not. Try to see if the openssh has any vulnerabilities:

However, this result is not so much promising. Still, we probably can brute force the system to get the login credentials. Let’s find out some more vulnerabilities before we start exploiting them. The ftp application ProFTPD 1.3.1 looks promising. Let’s search if anything is in the Metasploit database:

Seems like there is no specific mention of version 1.3.1 for the ProFTPD application. However, the other versions might still work. We’ll find that out very soon.

You can research each of the open port applications and find out what vulnerabilities might be associated with them. You can definitely use google and other exploit databases as well instead of only Metasploit.

Exploiting Vulnerabilities

This is the most anticipated step of the penetration test. In this step, we’ll exploit the victim machine in all its glory. Let’s begin with the most straightforward vulnerability to exploit that we found in the previous step. It is the VSFTPD 2.3.4 backdoor command execution exploit.

Exploiting the VSFTPD vulnerability

Let’s use the exploit (exploit/unix/ftp/vsftpd_234_backdoor):

After entering this command, you’ll see your command line will look like this:

This means you are using this exploit now. Let’s see the options for the exploit:

Let’s set up the RHOSTS as the target machine’s IP address (192.168.74.129 in my case):

See the options again:

Now you have to specify a payload as well. Let’s see what are our options:

Voila! We’ve successfully exploited the machine. We got the shell access. I ran the whoami command and got the reply as root. So, we have full access to the Metasploitable machine. We can do whatever the root can – everything!

Now before we show what to do after exploitation, let’s see some other methods of exploitation as well.

Keeping the sessions in the background

First, let’s keep the session we got in the background:

Type in background within the terminal, then type y and hit enter:

You can access this session anytime using the sessions command:

You can get back to the session by using the “-i” flag and specifying the ID. Do the following –

Exploiting samba smb

Did you notice that the netbios-ssn service was running on Samba in our victim machine’s port 139 and 445? There might be an exploit that we could use. But before that, there was no particular version written for the samba application. However, we have an auxiliary module in Metasploit that can find out the version for us. Let’s see this in action:

Now choose the smb scanner:

Now let’s see the options we have to set up:

We can set up the RHOSTS and THREADS here. The RHOSTS will be our target and the THREADS determine how fast will the program run. Let’s set them up:

Now run it:

The output gives us the version of the Samba – 3.0.20. Now we can find out the vulnerabilities associated with it. Let’s try google. A simple google search reveals this version is vulnerable to username map script command execution.

This is also available in Metasploit. Let’s perform a search:

As you can see, there is an exploit for this vulnerability with an excellent rank. Let’s use this one and try to gain access to the metasploitable machine:

We can see that the Payload options are already set up. I will not change it. You can change the LHOST to your attack machine’s IP address. We only need to set up the RHOSTS option:

Now let’s exploit:

As you can see the exploit sets up a reverse TCP handler to accept the incoming connection from the Victim machine. Then the exploit completes and opens a session. We can also see that the access level is root. Now let’s move on to another exploit keeping this session in the background.

Exploiting VNC

Now let’s try to exploit the VNC service running on our victim machine. If you search in Metasploit database, you will find no matching exploit for this one. This means you have to think of some other ways to get into this service. Let’s try to brute force the VNC login. We’ll be using the auxiliary scanner for vnc login:

We’ll be needing the VNC Authentication Scanner (3). Let’s select it:

We do not know what this auxiliary module does yet. Let’s find out. Remember the info command?

We can see the options this module will take. The description is also there. From the description, it becomes clear that this is a module that will try brute-forcing. Another conspicuous fact is that this module supports RFB protocol version 3.3, which is written in our discovered VNC service (protocol 3.3). If you’re wondering why this is related – VNC service uses RFB protocol. So this module is compatible with the VNC service in our victim machine. Let’s move forward with this.

We’ve already seen the options this module will take from the “info” command. The options marked in yellow are the important ones. Not all of them are required though. We can see the default password file (PASS_FILE) for the brute force will be (/usr/share/Metasploit-framework/data/wordlists/vnc_passwords.txt). We’ll not be changing this file. You might want to change this one if you’re doing real world tests that are not Metasploitable. We have to define RHOSTS. Let’s turn on STOP_ON_SUCCESS as well, which will stop the attack once the correct credentials are found. We’ll also increase the THREADS for faster operation, and set USER_AS_PASS to true, which will use the same username and password as well. Let’s set these up:

Now you can start running the brute force:

The brute force attempt was successful. We can see the username:password pair as well. There is no username set up here, and the password is just password. In real systems, most of the time the password will not be this simple. However, now you know how you can brute force the VNC authentication.

Now let’s try to login to the VNC with our cracked credentials. I’ll use the vncviewer command followed by the IP address of the victim machine:

At this point, you’ll have to provide the password. Type in password and you’ll get in:

Do you want to see the GUI version of the Metasploitable that we cracked just now? Here’s the view from the TightVNC application.

This is beautiful. Now you can pretty much do anything you desire. Now that we’ve shown you 3 ways you can exploit the Metasploitable with the Metasploit Framework, it’s time to show you the things you might have to do once you’ve gained access.

Post Exploitation tasks with Metasploit & Meterpreter

One of the tasks you might do after exploiting is keeping the session in the background while you work on the Metasploit Framework. We’ve already shown you how to do that in the previous section. However, if you exit from the session then that opened session will be gone.

You will need to exploit the machine once again to get another session. The same thing will happen if the victim chooses to reboot the machine. In this section, we’ll show you how to keep your access even if the victim reboots his/her machine.

One of the most useful tools after exploiting a target is the Meterpreter shell. It has many custom functionalities built into it that you don’t need to make a program or install any software to do.

What is Meterpreter?

Meterpreter is a Metasploit payload that gives an interactive shell that attackers may use and execute code on the victim system. It uses in-memory DLL injection to deploy. This allows Meterpreter to be fully deployed in the memory and it does not write anything to the disk. There are no new processes as Meterpreter gets injected into the affected process. It may also move to other operating processes. The forensic footprint of Meterpreter is therefore very small.

Upgrade to a meterpreter from shell

Meterpreter is an advanced payload for Metasploit that offers lots of functions after exploiting a system. But if you noticed, we didn’t get any meterpreter sessions from the exploits.

In fact, the exploits did not have an option to set meterpreter as a payload. Let’s learn how to upgrade to meterpreter from a shell. Let’s see the sessions we have at first using the sessions command:

As you can see, we have two sessions now with id 2 and 4. Both of these sessions are of unix cmd shell type. Now let’s try to upgrade to meterpreter. For this purpose, we’ll be using the shell to meterpreter exploit:

Let’s use the first one:

Now we have to specify the options. Remember the IDs of the sessions? Let’s try to upgrade the session ID 4:

Now exploit:

This exploit might not work properly the first time. Keep on trying again until it works. Now let’s look at the sessions again:

There is also another option to upgrade your shell session to meterpreter using the sessions command:

This is a much easier way. You can kill any sessions with the “sessions” command using the “-k” flag followed by the session ID. You can interact with any of the sessions using the “-i” flag with the sessions command. Let’s open session 3 that we just got –

As you can see, now we’re in meterpreter. There’s a lot a meterpreter console can do. You can type help to get a list of commands meterpreter supports. Let’s find out some of the functionalities that meterpreter can do.

Meterpreter functionalities

Meterpreter gives you loads of options for you to explore. You can get the commands by typing in “help” in meterpreter console. You can navigate the victim machine using the basic navigational commands of Linux. You can also download or upload some files into the victim system. There is a search option to search the victim machine with your desired keywords:

You can search for a file with the search command with -f flag:

Downloding any file is super straightforward as well:

You can enter the shell of the system anytime you like with the shell command:

Furthermore, there are some networking commands such as – arp, ifconfig, netstat, etc.

You can list the process running in the victim machine with the ps command. There is an option to see the PID of the process that has hosted the meterpreter:

In Windows systems, you may be able to migrate your meterpreter onto another process using the migrate command. You could also get keystrokes by using the keyscan_start and keyscan_dump depending on the system. On our victim machine, these commands are not supported:

You can always find out the capabilities from the help command. Always keep in mind, as long as you have the command execution abilities, you can just upload a script to the victim machine that will do the job for you.

Staying persistently on the exploited machine

As we told you earlier, if the victim system reboots, you will lose your active sessions. You might need to exploit the system once again or start the whole procedure from the very beginning – which might not be possible. If your victim machine runs Windows, there is an option called persistence in Metasploit, which will keep your access persistent. To do it you’ll have to use:

As you can see, this command does not work in our victim system. This is because it’s running on Linux. There is, however, an alternate option for keeping your access persistent on Linux machines as well.

For that purpose, you can use the crontab to do this. Cron is the task scheduler for Linux. If you’re not familiar with cron command in Linux, we suggest you follow an article that covers this topic in detail .

Create custom payloads with msfvenom

msfvenom is a tool that comes with the Metasploit Framework.

With this tool, you can create custom payloads tailored to specific targets and requirements. Furthermore, you can attach payloads with other files that make your payload less suspicious. You can also edit the codes of your payloads and change them to evade detection by the threat detection systems. You can see all the options available for msfvenom by typing in msfvenom -h.

Check all options for creating your payload

To see all the options for creating the payload, you can list the modules by using the -l flag followed by the module type – which will be payload in our case.

You’ll get a long list of payloads in the output. You can use grep command to narrow the result down to your liking. Let’s say I wanted to create payloads for Android. I’ll use the following to list the payloads:

Now, imagine I wanted to use the marked payload (android/meterpreter/reverse_tcp). I will need to know what options I have to set. To see the options for the payload, you’ll have to use the -p flag to specify the payload and the --list-options flag as below:

There are loads of options for this exploit, as you can see. The options are divided into two categories. Basic options and Advanced options. You can create a payload just by setting up the basic options. However, advanced options are very important as well. They offer customization as well as play a crucial role to evade threat detection systems.

You can modify them and check how many anti-viruses detect it as a threat. Many online websites allow you to check your payloads. Keep in mind, however, that these systems might store your data and add them to the anti-virus database, rendering your payloads to be detected more often.

VirusTotal is a website that allows you to upload a file and check for viruses. There are online virus checkers for almost all the anti-virus packages (avast, avg, eset, etc.). At the end of this article, you’ll see me testing our payload on these websites.

Encoding your payload to evade detection

Before we create the payload, remember encoders? Encoders are the modules that encrypt the code so it becomes harder for the threat detection systems to detect it as a threat. Let’s see how to encode our payload. At first, list the encoder options available. I’ll use the ruby based encoders by grepping ruby:

Let’s set up the basic options and create a basic payload now:

Here, the LHOST is our IP address and LPORT is the port for the connection. You should change the default port to evade easy detection. Now, before we send this payload, we need to set up the handler for the incoming connection. Handler is just a program that will listen on a port for incoming connections, since the victim will connect to us. To do that, we’ll fire up msfconsole and search multi/handler:

As you can see, number 5 is our manual and Generic Payload Handler. Use this one and we must set our payload matching to the one we just used (/android/meterpreter/reverse_tcp) –

In the output, we can see that the default payload for exploit (multi/handler) was (generic/shell_reverse_tcp). So we set the payload to our desired one (android/meterpreter/reverse_tcp). Now let’s set up the LHOST to 192.168.74.128 (attack machine’s IP) and LPORT to 8080 just like we did when we created the payload:

Now you can run this exploit to start listening in for connections –

The meterpreter session will start as soon as the Android device installs the apk file. This concludes how you can create payloads with the msfvenom tool. You can send this apk out and ask the victims to install it by social engineering or go install it yourself if you have physical access. Bear in mind that violation of privacy and system penetration without permission is illegal and we suggest you use these techniques ethically for learning purposes only.

Checking if your payload can evade anti-virus programs

We’ve already told you how you might try to evade the anti-virus software. Let’s have some fun now. We’ll check how many viruses can detect our apk payload that we just created.

The result is phenomenal. Or, there might be something wrong here! The VirusTotal website might not properly work for the APK files. Whatever it may be, you now know how to create custom payloads for penetration testing.

Conclusion

In this tutorial, you learned about Metasploit Framework from the basics to the advanced level. You can experiment and practice to learn more on your own.

We showed you how to use Metasploit on an intentionally vulnerable machine Metasploitable 2. In reality, these types of backdated and vulnerable machines might not be present nowadays. However, there are so many vectors from where an attack might be possible. Keep on learning.

Remember to use your knowledge for the good. We hope you liked our tutorial. If you have something you’d like to ask, feel free to leave a comment. We’ll get back to you as soon as possible.

Metasploit

Tag: Exploitation

Metasploit, one of the most widely used penetration testing tools, is a very powerful all-in-one tool for performing different steps of a penetration test.

In this tutorial, we’ll be covering the basics of Metasploit Framework in detail and show you real examples of how to use this powerful tool to the fullest.

Table of Contents

To install Metasploit in Linux you have to get the package metasploit-framework. On Debian and Ubuntu based Linux distros, you can use the apt utility:

On CentOS/Redhat you can the yum utility to do the same:

If you’re not sure if you have Metasploit or not, you can confirm by typing msfconsole in your terminal:

Metasploit Tip: Start commands with a space to avoid saving them to history

As you can see my machine already has Metasploit Framework installed.

Metasploit changes its greeting messages every time you fire up the Metasploit Framework with the msfconsole command, so you might see a different greeting message when you run it.

You can also find out which version is installed once the program loads. Type in version and hit enter to get the answer:

msf6 > msfupdate

[*] exec: msfupdate

msfupdate is no longer supported when Metasploit is part of the operating

system. Please use ‘apt update; apt install metasploit-framework’

Now that you know how to install and update the Metasploit framework, let’s begin learning some of the basics related to Metasploit.

Basics of Penetration testing

Information Gathering / Reconnaissance
Vulnerability Analysis
Exploitation

1. Information gathering / Reconnaissance

2. Vulnerability Analysis

3. Exploitation

After the identified vulnerabilities have been analyzed, this is the step to take advantage of the vulnerabilities.

In this step, specific programs/exploits are used to attack the machine with the vulnerabilities.

You might wonder, where do these exploits come from?

Now, you may ask if the vulnerabilities are discovered, aren’t those application already fixed? The answer is yes, they are. But the fix comes around in the next update of the application.

4. Post Exploitation

5. Report

Now, after the long wait, let’s get into the basics of the actual program – Metasploit Framework.

In this section, we’ll learn all the basics related to Metasploit Framework. This will help us understand the terminologies related to the program and use the basic commands to navigate through.

As discussed earlier, Metasploit can be used in most of the penetration testing steps. The core functionalities that Metasploit provides can be summarized by some of the modules:

Exploits
Payloads
Auxiliaries

Now we’ll discuss each of them and explain what they mean.

1. Exploits

2. Payloads

Metasploit Framework has a lot of options for payloads. Some of the most used ones are the reverse shell, bind shell, meterpreter, etc.

3. Auxiliaries

4. Encoders

msfconsole
msfdb
msfvenom

Let’s talk about each of these components.

1. msfconsole

2. msfdb

3. msfvenom

4. meterpreter

Let’s browse through the Metasploit directory:

Type in ls to see the contents of the directory:

As you can see, there is a directory called modules, which should contain the exploits, payloads, auxiliaries, encoders, as discussed before. Let’s get into it:

What you’re seeing now are the categories of the exploits. For example, the linux directory contains all the exploits that are available for Linux systems.

Let’s take a look at the exploits for ssh.

You can see the code for the exploit is shown here. The green marked section is the description of the exploit and the yellow marked portion is the options that can be set for this exploit.

In this way, you can also find out what payloads are there in your Metasploit Framework, add your own in the directory, and modify the existing ones.

Now let’s move on to the fun stuff. In this section, we’ll talk about some of the basic Metasploit commands that you’re going to need all the time.

Fire up the Metasploit console by typing in msfconsole. Now you will see msf6 > indicating you’re in the interactive mode.

Now, let’s take a look at some important commands.

Show command

For example, you can see all the exploits by using the command in the following way:

This will list all the existing exploits, which will be a long list, needless to say. Let’s look at how many encoders are there:

Show command can be used inside of any modules to get specific modules that are compatible. You’ll understand this better in the later sections.

How do you find out if that service has any vulnerability which has ready-made exploits on Metasploit?

You guessed it – you must use the search utility of Metasploit.

It doesn’t even have to be the exploits, you can also find out payloads, auxiliaries, etc., and you can search the descriptions as well.

A relatively new exploit will affect many of the machines running the service since they might not have updated the vulnerable application in the short time period.

The use command

After you’ve chosen the module you want to use, you can select the module by the use command followed by the name or the id of the module. Let’s use the first one we got from the search result:

You can also specify the number for the module:

Get the description of the module with the info command

See the options you need to specify for the modules

You can see the options for this specific exploit(unix/webapp/citrix_access_gateway_exec). You can also see the options for the default Payload (cmd/unix/reverse_netcat) for this exploit.

Use the set command to set a value to a variable

Now we’ve successfully set up the value of the RHOSTS variable with the set command. Let’s check if it worked or not. Type in show options:

The output shows the RHOSTS variable or option has the target machine IP address that we specified using the set command.

Choose the Payload

The output shows that the payload is set to (cmd/unix/reverse_ssh). Let’s set up the payload. Type in show options:

The option for the payload shows that the selected payload is now changed to our desired one (cmd/unix/reverse_ssh). You can set the payload options with the set command as well:

Here, we’ve set the local port for listening to 5000 from the default 4444. Let’s see our changes in the options.

Now that you’ve set up the exploit and the payload – you can start the fun. Let’s move on to the exploit commands.

Check if the exploit will work or not

We’ll show you an example of an exploitable machine in the next section. Keep on reading!

A penetration test walkthrough

Target identification and Host discovery

In my case, I ran ifconfig command on my Metasploitable machine, and got the IP address to be 192.168.74.129. Let’s see if our attack machine can ping the victim machine:

It’s clear that our attack machine can reach the victim machine. Let’s move on to the next step.

Port scanning & Service detection

Vulnerability Analysis

Seems like there is no specific mention of version 1.3.1 for the ProFTPD application. However, the other versions might still work. We’ll find that out very soon.

Exploiting Vulnerabilities

Exploiting the VSFTPD vulnerability

Let’s use the exploit (exploit/unix/ftp/vsftpd_234_backdoor):

After entering this command, you’ll see your command line will look like this:

This means you are using this exploit now. Let’s see the options for the exploit:

Let’s set up the RHOSTS as the target machine’s IP address (192.168.74.129 in my case):

See the options again:

Now you have to specify a payload as well. Let’s see what are our options:

Now before we show what to do after exploitation, let’s see some other methods of exploitation as well.

Keeping the sessions in the background

First, let’s keep the session we got in the background:

Type in background within the terminal, then type y and hit enter:

You can access this session anytime using the sessions command:

You can get back to the session by using the “-i” flag and specifying the ID. Do the following –

Exploiting samba smb

Now choose the smb scanner:

Now let’s see the options we have to set up:

We can set up the RHOSTS and THREADS here. The RHOSTS will be our target and the THREADS determine how fast will the program run. Let’s set them up:

Now run it:

This is also available in Metasploit. Let’s perform a search:

As you can see, there is an exploit for this vulnerability with an excellent rank. Let’s use this one and try to gain access to the metasploitable machine:

We can see that the Payload options are already set up. I will not change it. You can change the LHOST to your attack machine’s IP address. We only need to set up the RHOSTS option:

Now let’s exploit:

Exploiting VNC

We’ll be needing the VNC Authentication Scanner (3). Let’s select it:

We do not know what this auxiliary module does yet. Let’s find out. Remember the info command?

Now you can start running the brute force:

Now let’s try to login to the VNC with our cracked credentials. I’ll use the vncviewer command followed by the IP address of the victim machine:

At this point, you’ll have to provide the password. Type in password and you’ll get in:

Do you want to see the GUI version of the Metasploitable that we cracked just now? Here’s the view from the TightVNC application.

Post Exploitation tasks with Metasploit & Meterpreter

What is Meterpreter?

Upgrade to a meterpreter from shell

Meterpreter is an advanced payload for Metasploit that offers lots of functions after exploiting a system. But if you noticed, we didn’t get any meterpreter sessions from the exploits.

Let’s use the first one:

Now we have to specify the options. Remember the IDs of the sessions? Let’s try to upgrade the session ID 4:

Now exploit:

This exploit might not work properly the first time. Keep on trying again until it works. Now let’s look at the sessions again:

There is also another option to upgrade your shell session to meterpreter using the sessions command:

Meterpreter functionalities

You can search for a file with the search command with -f flag:

Downloding any file is super straightforward as well:

You can enter the shell of the system anytime you like with the shell command:

Furthermore, there are some networking commands such as – arp, ifconfig, netstat, etc.

You can list the process running in the victim machine with the ps command. There is an option to see the PID of the process that has hosted the meterpreter:

Staying persistently on the exploited machine

Create custom payloads with msfvenom

msfvenom is a tool that comes with the Metasploit Framework.

Check all options for creating your payload

To see all the options for creating the payload, you can list the modules by using the -l flag followed by the module type – which will be payload in our case.

Encoding your payload to evade detection

Let’s set up the basic options and create a basic payload now:

As you can see, number 5 is our manual and Generic Payload Handler. Use this one and we must set our payload matching to the one we just used (/android/meterpreter/reverse_tcp) –

Now you can run this exploit to start listening in for connections –

Checking if your payload can evade anti-virus programs

We’ve already told you how you might try to evade the anti-virus software. Let’s have some fun now. We’ll check how many viruses can detect our apk payload that we just created.

Conclusion

In this tutorial, you learned about Metasploit Framework from the basics to the advanced level. You can experiment and practice to learn more on your own.

Remember to use your knowledge for the good. We hope you liked our tutorial. If you have something you’d like to ask, feel free to leave a comment. We’ll get back to you as soon as possible.

Metasploit

hashtagBasics of Penetration testing

hashtag1. Information gathering / Reconnaissance

hashtag2. Vulnerability Analysis

hashtag3. Exploitation

hashtag4. Post Exploitation

hashtag5. Report

hashtag1. Exploits

hashtag2. Payloads

hashtag3. Auxiliaries

hashtag4. Encoders

hashtag1. msfconsole

hashtag2. msfdb

hashtag3. msfvenom

hashtag4. meterpreter

hashtagShow command

hashtagThe use command

hashtagGet the description of the module with the info command

hashtagSee the options you need to specify for the modules

hashtagUse the set command to set a value to a variable

hashtagChoose the Payload

hashtagCheck if the exploit will work or not

hashtagA penetration test walkthrough

hashtagTarget identification and Host discovery

hashtagPort scanning & Service detection

hashtagVulnerability Analysis

hashtagExploiting Vulnerabilities

hashtagExploiting the VSFTPD vulnerability

hashtagKeeping the sessions in the background

hashtagExploiting samba smb

hashtagExploiting VNC

hashtagPost Exploitation tasks with Metasploit & Meterpreter

hashtagWhat is Meterpreter?

hashtagUpgrade to a meterpreter from shell

hashtagMeterpreter functionalities

hashtagStaying persistently on the exploited machine

hashtagCreate custom payloads with msfvenom

hashtagCheck all options for creating your payload

hashtagEncoding your payload to evade detection

hashtagChecking if your payload can evade anti-virus programs

hashtagConclusion

Metasploit

hashtagBasics of Penetration testing

hashtag1. Information gathering / Reconnaissance

hashtag2. Vulnerability Analysis

hashtag3. Exploitation

hashtag4. Post Exploitation

hashtag5. Report

hashtag1. Exploits

hashtag2. Payloads

hashtag3. Auxiliaries

hashtag4. Encoders

hashtag1. msfconsole

hashtag2. msfdb

hashtag3. msfvenom

hashtag4. meterpreter

hashtagShow command

hashtagThe use command

hashtagGet the description of the module with the info command

hashtagSee the options you need to specify for the modules

hashtagUse the set command to set a value to a variable

hashtagChoose the Payload

hashtagCheck if the exploit will work or not

hashtagA penetration test walkthrough

hashtagTarget identification and Host discovery

hashtagPort scanning & Service detection

hashtagVulnerability Analysis

hashtagExploiting Vulnerabilities

hashtagExploiting the VSFTPD vulnerability

hashtagKeeping the sessions in the background

hashtagExploiting samba smb

hashtagExploiting VNC

hashtagPost Exploitation tasks with Metasploit & Meterpreter

hashtagWhat is Meterpreter?

hashtagUpgrade to a meterpreter from shell

hashtagMeterpreter functionalities

hashtagStaying persistently on the exploited machine

hashtagCreate custom payloads with msfvenom

hashtagCheck all options for creating your payload

hashtagEncoding your payload to evade detection

Basics of Penetration testing

1. Information gathering / Reconnaissance

2. Vulnerability Analysis

3. Exploitation

4. Post Exploitation

5. Report

1. Exploits

2. Payloads

3. Auxiliaries

4. Encoders

1. msfconsole

2. msfdb

3. msfvenom

4. meterpreter

Show command

The use command

Get the description of the module with the info command

See the options you need to specify for the modules

Use the set command to set a value to a variable

Choose the Payload

Check if the exploit will work or not

A penetration test walkthrough

Target identification and Host discovery

Port scanning & Service detection

Vulnerability Analysis

Exploiting Vulnerabilities

Exploiting the VSFTPD vulnerability

Keeping the sessions in the background

Exploiting samba smb

Exploiting VNC

Post Exploitation tasks with Metasploit & Meterpreter

What is Meterpreter?

Upgrade to a meterpreter from shell

Meterpreter functionalities

Staying persistently on the exploited machine

Create custom payloads with msfvenom

Check all options for creating your payload

Encoding your payload to evade detection

Checking if your payload can evade anti-virus programs

Conclusion

Basics of Penetration testing

1. Information gathering / Reconnaissance

2. Vulnerability Analysis

3. Exploitation

4. Post Exploitation

5. Report

1. Exploits

2. Payloads

3. Auxiliaries

4. Encoders

1. msfconsole

2. msfdb

3. msfvenom

4. meterpreter

Show command

The use command

Get the description of the module with the info command

See the options you need to specify for the modules

Use the set command to set a value to a variable

Choose the Payload

Check if the exploit will work or not

A penetration test walkthrough

Target identification and Host discovery

Port scanning & Service detection

Vulnerability Analysis

Exploiting Vulnerabilities

Exploiting the VSFTPD vulnerability

Keeping the sessions in the background

Exploiting samba smb

Exploiting VNC

Post Exploitation tasks with Metasploit & Meterpreter

What is Meterpreter?

Upgrade to a meterpreter from shell

Meterpreter functionalities

Staying persistently on the exploited machine

Create custom payloads with msfvenom

Check all options for creating your payload

Encoding your payload to evade detection

Checking if your payload can evade anti-virus programs

Conclusion